Graco Booster Seat - Assembling the Booster Seat; Attaching Armrests

9
Assembling the Booster Seat
Step 1.
Insert armrest into base
as shown until buttons
snap into slots on side of
base .
Step 2.
Select the desired
armrest height for your
child, then insert the
height adjustment
screw and tighten.
Repeat for other
armrest.
Step 3.
To adjust armrests,
remove screw and press
in button on side of
base as shown to raise
or lower . Reinsert
screw and tighten.
CHECK to make sure
armrests are securely
attached by pulling up
on them.
SNAP!
1
1
2
2
3
3