To Next PageTo Next Page
Need help?Do you have a question about the Graco CleanShot and is the answer not in the manual?
General| Brand | Graco |
|---|---|
| Model | CleanShot |
| Category | Control Unit |
| Language | English |
High pressure spray can inject fluid through skin causing serious injury, including amputation.
Treat injected fluid as a traumatic injury requiring immediate surgical treatment.
Do not exceed the maximum working pressure of the adapter or system components.
Follow steps to relieve fluid pressure before servicing or stopping operation.
Avoid certain solvents like 1,1,1-trichloroethane due to reaction risk with aluminum/zinc parts.
Misuse can cause rupture, fluid injection, fire, or explosion, leading to serious injury.
Step-by-step guide for installing the spray tip and guard onto the shut-off valve.
Explanation of the two settings: SPRAY for high pressure and FLUSH for cleaning/low pressure.
Lists available repair kits for the CleanShot valve and swivel assembly.
Diagram illustrating the various parts of the CleanShot Shut-Off Valve and associated components.
Comprehensive list of parts with reference numbers, part numbers, descriptions, and quantities.
Key technical data including wetted parts and maximum working pressure.
Details Graco's warranty for equipment defects and the purchaser's sole remedy.
Outlines limitations on warranties and liability, excluding consequential damages.
Specifies that Graco disclaims warranties for non-Graco manufactured accessories or components.
