Instructions – Parts List
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
Copyright 1988, Graco Inc. is registered to I.S. EN ISO 9001
50:1 RATIO FIRE–BALL
R
Lubrication Pumps
Portable Units for Heavy Grease
5000 psi (35 MPa, 350 bar) Maximum Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
307878V
WARNING
These systems are designed to be used only in
pumping non-corrosive and non-abrasive lubricants
and greases. Any other use of the system can
cause unsafe operating conditions and result in
component rupture, fire, or explosion which can
cause serious injury, including fluid injection.
Model 240883 shown
01514A
Important Safety Instructions.
Read all warnings and instructions in this manual.
Save these instructions. See page 2 for List of
Models and Table of Contents.
To Next Page
Need help?
General
