Important
4 Forward
Facing
5. Route the Vehicle Seat Belt
Thread vehicle seat belt through the
forward-facing belt path (marked with
a orange label) and out the other side.
Buckle it. The seat belt should lie as flat
as possible and not be twisted.
6. Lock the Vehicle Seat Belt
In most vehicles today, slowly pull the
shoulder belt all the way out and then let it
go back in. You will hear a clicking sound.
Slowly pull out on the belt and it should
be locked. If not, review your car’s owner
manual and section 7-D.
8. Attach Top Tether Strap
Extend the top tether by
lifting up on the tether
lock and attach. Consult
vehicle’s owner manual
for specific location.
7. Tighten the Vehicle Seat Belt
Press down firmly in the center of the car
seat. Pull on the shoulder belt to tighten
while feeding the slack back in the retractor.
9. Tighten the Top Tether Strap
Push the car seat back while tightening the
top tether strap to remove all the slack.
continue next page
To Next Page
Loading...
Need help?
General
