Graco Magnum DX 232735 User Manual

30 pages

To Next Page

Form No. 309226

Rev. A

This manual contains service

instructions only. See manual

309316 Operators Quick Guide and

309225 Operating Instructions for

complete operating instructions.

MAGNUM XR9

Model 232750

MAGNUM XR7

Model 232745

MAGNUM XR5

Model 232740

9558A

9559A

MAGNUM DX

Model 232735

MAGNUM DX, Model 232735, Series A

0.24 gpm (0.91 lpm) stand–mount sprayer, 25 ft (7.6 m)

3/16” hose and SG1t–EF spray gun with reversible spray

tip and guard.

2800 psi (19 MPa, 193 bar) Maximum Working Pressure

AGNUM XR5, Model 232740, Series A

0.27 gpm (1.02 lpm) stand–mount sprayer, 25 ft (7.6 m)

1/4” hose and SG1–EF spray gun with reversible spray tip

and guard.

3000 psi (21 MPa, 207 bar) Maximum Working Pressure

MAGNUM XR7, Model 232745, Series A

0.31 gpm (1.17 lpm) stand–mount sprayer, 50 ft (15.2 m)

1/4” hose and SG2t metal spray gun with reversible spray

tip and guard.

3000 psi (21 MPa, 207 bar) Maximum Working Pressure

MAGNUM XR9, Model 232750, Series A

0.38 gpm (1.44 lpm) stand–mount sprayer, 50 ft (15.2 m)

1/4” hose and SG3t pro metal spray gun with reversible

spray tip and guard.

3000 psi (21 MPa, 207 bar) Maximum Working Pressure

9558A

Service Instructions

INSTRUCTIONS

This manual contains important

warnings and information.

READ AND KEEP FOR REFERENCE.

Airless Sprayers

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Graco Inc. is registered to I.S. EN ISO 9001

Questions and Answers:

M
Mr. Lawrence SmithJul 30, 2025
What to do if Graco Magnum DX 232735 motor does not run?
- A
  alyssa79Jul 30, 2025
  If your Graco Paint Sprayer's motor isn't running and the pump isn't cycling, even though the power switch is on and it's plugged in, there are several potential causes. First, the pressure may be set too low; try turning the Pressure Control knob clockwise to increase the pressure setting. Also, the electrical outlet may not be providing power; try a different outlet or test the outlet with a working device. Check and reset the building circuit breaker, or replace the fuse if necessary. Damaged extension or sprayer electrical cords can also prevent operation; inspect for broken insulation or wires and replace if damaged.