Graco Modes Click Connect User Manual

16
THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR
INFANT RESTRAINT, IF the seat location meets all other requirements
of these instructions and those in your vehicle owner’s manual. LATCH
can be used in place of the vehicle belt system in designated locations.
Please refer to vehicle owner’s manual for LATCH locations.
When using infant restraint without the base, adjust the belt as
described in this section for these types of vehicle seat belts.
Some vehicle lap/shoulder seat belts have a plastic button on the belt.
Do not allow the button to interfere with the belt routing through the
vehicle belt path when installing the seat alone.
 Lap Belts - Manually Adjusted
When buckled, the belt is
tightened manually by pulling on
the belt tail while pushing down
hard on the infant restraint.
4.2.2 SAFE Vehicle Belt Systems
Belt tail

Graco Modes Click Connect Specifications

General

Weight Capacity	50 lbs
Recline Positions	Multiple
Harness Type	Convertible 3- or 5-point harness
Car Seat Compatibility	Graco Click Connect infant car seats
Stroller Depth	34.5 inches
Frame Material	Aluminum
Parent Tray	Yes
Child Tray	Yes