Graco Modes Click Connect User Manual

28
1. Make sure vehicle is on level ground in
order to get the correct recline position.
2. Place the base
in a rear-facing
position on a
forward-facing
vehicle seat.

6.2 Installing the Infant Restraint and
Base Using Vehicle Belt
Lap Belt
Lap/Shoulder
Belt

3. Buckle the seat belt. Make sure the buckle
tongue goes into the correct buckle

. The
seat belt should not be twisted or turned.



Graco Modes Click Connect Specifications

General

Weight Capacity	50 lbs
Recline Positions	Multiple
Harness Type	Convertible 3- or 5-point harness
Car Seat Compatibility	Graco Click Connect infant car seats
Stroller Depth	34.5 inches
Frame Material	Aluminum
Parent Tray	Yes
Child Tray	Yes