Graco Modes Click Connect User Manual

27
1. Place the infant restraint without base in a rear-facing
position in a vehicle seat.
2. Thread the lap belt or lap portion of a lap/shoulder belt under both
vehicle belt hooks:
3. Buckle the vehicle belt.
4. Tighten the vehicle seat belt.
To create a secure installation, push
down hard with your free hand on
the infant restraint and pull and
tighten the vehicle belt.

5. Check infant restraint is level: Red level
line on the warning label MUST be
level with the ground .
6. Test infant restraint for secure
installation as described in infant
restraint “Final Safety Check” page 42.
Lap Belt


Lap/Shoulder
Belt

Graco Modes Click Connect Specifications

General

Weight Capacity	50 lbs
Recline Positions	Multiple
Harness Type	Convertible 3- or 5-point harness
Car Seat Compatibility	Graco Click Connect infant car seats
Stroller Depth	34.5 inches
Frame Material	Aluminum
Parent Tray	Yes
Child Tray	Yes