Graco Modes Click Connect User Manual

34
To Adjust Recline on Base:
Turn the knob clockwise to the desired setting
to lower the foot .
Turn the knob counter clockwise to raise the
foot .
If there is still red in the level indicator when the
foot is completely extended then raise the foot
and place a rolled towel under the foot until
ONLY blue shows.
When using only the infant restraint without
the base, CHECK infant restraint is level with the ground. Red level
line on the warning label (see step on pg 27) MUST be level with the
ground.
If the infant restraint is resting on the vehicle seat
and is still not level then place a rolled towel under
the infant restraint .
Re-adjust the vehicle seat belt as necessary to
secure the infant restraint firmly in the vehicle seat.





Graco Modes Click Connect Specifications

General

Weight Capacity	50 lbs
Recline Positions	Multiple
Harness Type	Convertible 3- or 5-point harness
Car Seat Compatibility	Graco Click Connect infant car seats
Stroller Depth	34.5 inches
Frame Material	Aluminum
Parent Tray	Yes
Child Tray	Yes