64
Graco allows the securing of the booster seat
with UAS in the booster mode, only if the vehicle
manufacurer allows it. The child still MUST BE
SECURED with the vehicle lap/shoulder seat belt.
UAS can be used in the booster mode regardless of
the weight of the child up to 45 kg (100 lb).
Verify the following before using UAS in the booster
mode:
• The UAS connectors DO NOT interfere with any
vehicle seat belts or buckles.
If the UAS interferes with the vehicle seat belts or
if the chosen seating position does not have UAS, you MUST store the UAS strap.
Store the UAS strap by placing UAS strap and connectors in storage compartment.
Store the top tether strap as shown. Always secure car seat with UAS or a vehicle
seat belt, even when unoccupied. In a crash, an unsecured car seat can injure
passengers.
Skip to Step 14 if Not Using UAS
4. Open the UAS Storage Door
5. Take the UAS System Out of the
Storage Compartment
Do not remove the UAS system from the car
seat.
6. Close the UAS Storage Door
Do not let the UAS strap interfere with the
harness straps.
7. Thread the UAS System Into the
Forward-Facing Belt Path
From the right side of the seat, thread the
UAS connector closest to the adjuster
through the forward-facing belt path marked
with an orange label as shown.
To Next Page
Loading...
Need help?
General
