To Next PageTo Next Page
Need help?Do you have a question about the Graco TRANZITIONS and is the answer not in the manual?
General| Product Type | 3-in-1 Harness Booster Car Seat |
|---|---|
| Weight Capacity | 22-100 lbs |
| Height Capacity | 27-57 inches |
| Harness Type | 5-point harness |
| Cup Holders | 2 |
| Harness Mode Weight | 22-65 lbs |
| Harness Mode Height | 27-49 inches |
| Booster Mode Weight | 40-100 lbs |
| Booster Mode Height | 43-57 inches |
| Number of Recline Positions | 2 |
| Warranty | 1 year limited warranty |
| Installation | LATCH or Seat Belt |
| Modes | Harness, Highback Booster, Backless Booster |
| Safety Features | Side Impact Protection, EPS Energy Absorbing Foam |
| Harness Positions | 8-position adjustable headrest |
Guide to using the manual, child weight and height limits, and best seating locations.
Welcome message emphasizing the importance of following instructions for safe use of the car seat.
Specifies weight and height limits for forward-facing harness and booster modes.
Information on registering the restraint, getting help, certification, and usage considerations.
Crucial safety warnings regarding the risks of improper use and the need to read the manual.
Instructions on how to install the car seat's cup holder by aligning tabs and sliding into place.
Detailed illustration and labeling of the car seat's various components and features.
Guidelines for placing the car seat forward-facing, routing straps, and securing the child.
Step-by-step instructions for installing the car seat forward-facing using the UAS (Universal Anchor System).
Step-by-step instructions for installing the car seat forward-facing using the vehicle seat belt.
Guidelines for using the car seat as a booster seat, with and without the back support.
Instructions for converting the car seat into a backed booster mode by removing the harness.
Instructions for using the car seat as a backless booster, including UAS installation for this mode.
Detailed steps for properly securing a child using the 5-point harness system.
Instructions on how to properly secure a child in the backed booster mode using the vehicle seat belt.
Steps for securing a child in the backless booster mode, including guidance on belt positioning.
Information about optional accessories like harness covers, body support, and cup holder.
Step-by-step guide on how to safely remove the UAS and top tether from the car seat.
Advice on selecting the safest seating location within the vehicle for car seat installation.
Identification of unsafe vehicle seating locations for installing the car seat.
Guides users to identify their vehicle's seat belt type (lap/shoulder vs. lap-only) and unsafe types.
Details installation procedures for forward-facing modes using lap/shoulder belts and different retractor types.
Instructions for lap belt installation specifically for booster modes, covering different latch plate types.
Guidance on cleaning the seat pad, head support cover, and seat cover, including washing instructions.
Instructions for cleaning the buckle strap, emphasizing not to submerge and use mild methods.
Instructions for cleaning harness and UAS straps with mild soap and damp cloth, avoiding immersion.
