Graco TRANZITIONS - Using Belt Positioning Clip

5 Securing
Child
67
Using Belt Positioning Clip
1. Make Sure Vehicle’s Seat Shoulder Belt Lays in
the Red Zone As Shown
If the vehicle’s seat shoulder belt lays outside this zone,
you MUST use the belt positioning clip.
2. To attach clip to booster seat:
There are 2 slots on the back of the booster seat. Choose
the slot that is the further away from the vehicle buckle,
where the shoulder belt will lie across your child’s
shoulder. Insert the loop end of the strap through the
chosen slot.
3. Push Clip and Strap
Through Loop
Pass the clip and the strap through the loop end as shown
and pull strap up.