Graco Recline N' Ride ON THE GO - Install Rear-Facing with Vehicle Seat Belt

3 Rear
Facing
40
3-C Install Rear-Facing With Vehicle Seat Belt
1. Rotate the Recline Foot
Rotate the light grey recline foot on the bottom of the car seat
into the rear-facing position marked with a blue label. The
recline foot is secure when it “clicks” into place.
2. Recline the Car Seat
Fully recline the car seat to fully expose the rear-facing belt
path.
Visit www.gracobaby.com and the Graco
®
Recline N’ Ride™ Car Seat product page
to view the installation video.
Click!