41
3. Store Top Tether and LATCH Strap
Store top tether hook as shown. From the bottom of the
seat, open the LATCH storage door and slide the LATCH
connectors into the storage locations. Remove the slack from
both straps.
4. Place Car Seat Rear-Facing
in Back Seat of the Vehicle
Place the base flat on the vehicle seat. Push it back until the
car seat touches the vehicle seat back.
1. Rotate the Recline Foot
Rotate the light grey recline foot on the bottom of the car seat
into the rear-facing position marked with a blue label. The
recline foot is secure when it “clicks” into place.
2. Recline the Car Seat
Fully recline the car seat to fully expose the rear-facing belt
path.
To Next Page
Loading...
