Graco Size4Me 70 - REAR-FACING INSTALLATION WITH VEHICLE SEAT BELTS

22
0LEASEREFERTOPh6EHICLE3EAT"ELTSv
TODETERMINEWHATTYPEOFVEHICLESEAT
BELTISINYOURVEHICLE
1. Store rear-facing and forward-facing
LATCH belt as shown (a). Pull out on
handle on front of child restraint(b)
and adjust to rear-facing position 1 (c).
2. Place rear-facing ONVEHICLESEAT
3. 4HREADVEHICLESEATBELTTHROUGH
rear-facing openings under the seat
PADANDBUCKLEBELT(d). Press down
firmly in center of child restraint to
COMPRESSVEHICLESEATCUSHIONWHILE
TIGHTENINGVEHICLESEATBELT(e).
LATCH belts MUST be stored when
USINGVEHICLESEATBELTTOINSTALLCHILD
restraint.
REAR-FACING INSTALLATION WITH VEHICLE SEAT BELTS
a
b
d
e
WARNING
c