Graco Size4Me 70 - Page 36

36
Removing LATCH from Vehicle
Anchor Points:
1. Release the tension on the LATCH connector by
LIFTINGLEVERASSHOWN(a).
4OREMOVELATCH, pull on release strap as shown
(b).
3. Repeat steps for other connector.
a
OPERATIONS & ADJUSTMENTS
CONTINUED
Removing Tether from Vehicle
1. Release the tension on the tether connector by
LIFTINGLEVERASSHOWN(c).
2. Press and hold tether release hinge. (d).
3. Push connector in, lift connector up and
PULLOUTAWAYFROMANCHORPOINT(d).
b
c
d