Graco Size4Me 70 - Locking Clip Installation Procedure

46
)NSTALLCHILDRESTRAINTANDTIGHTENVEHICLESEATBELT
2. Hold seat belts together at latch plate (a)THENUNBUCKLE
3LIDELOCKINGCLIPONSEATBELTSAPPOXIMATELYINCH
CMANDUPTOINCHCMAWAYFROMLATCHPLATE
2EBUCKLESEATBELT
4ESTINSTALLATIONTOSEEIFCHILDRESTRAINTISSECURE
If not secure, additional belt tightening may be required:
s5NBUCKLEVEHICLESEATBELT
s(OLDBELTSTOGETHERANDREMOVELOCKINGCLIP
s3HORTENLENGTHOFLAPBELTPORTION
slightly by pulling belt through latch plate
s2EATTACHLOCKINGCLIP
s"UCKLEVEHICLESEATBELT
0RESSCHILDRESTRAINTFURTHERDOWNINTOVEHICLESEAT
CUSHIONTOHELPBUCKLEVEHICLESEATBELT
4ESTINSTALLATIONTOSEEIFCHILDRESTRAINTISSECURE)FNOTSECURE
REPEATABOVESTEPUNTILSECURE
WITHINv
CM
a
VEHICLE SEAT BELTS
CONTINUED