Graco SnugRide 30 User Manual

1-A Quick Guide to Your Manual
1-B Before You Begin
1-C Safety Warnings
2-A Car Seat Features
2-B Remove Car Seat from Base
2-C Attach Car Seat to Base
2-D Adjusting Carry Handle
2-E Choosing Vehicle Seat Location
2-D Choosing LATCH or Seat Belt
2-D What Is LATCH
3-A Rear-Facing Checklist
3-B Install With Base With LATCH Strap
3-C Install With Base With Vehicle Seat Belt
3-D Install Without Base With Vehicle Seat Belt
Important Pages 4-13
Features Pages 14-21
Rear-Facing Use Pages 22-40
2
4-A Adjust Harness to Fit Child
4-B Adjust Buckle to Fit Child
4-C Securing Child in Car Seat
4-D Removing Child
Securing Child Pages 41-51
Carrier Use Pages 52-53
3
Vehicle Information Pages 54-64
6-A Additional LATCH Information
6-B How to Remove LATCH
6-C Unsafe Vehicle Seats
6-D Vehicle Seat Belts
Accessories Pages 65-66
Care & Cleaning Pages 67-71
8-A Cleaning Seat Pad
8-B Cleaning Buckle

Graco SnugRide 30 Specifications

General

Weight Capacity	4-30 lbs
Height Limit	Up to 30 inches
Harness Type	5-point harness
Infant Head Support	Yes
Side Impact Protection	Yes
Car Seat Base Included	Yes
Adjustable Canopy	Yes
Removable Cover	Yes
Installation	LATCH system or vehicle seat belt
Product Weight	7.5 lbs (without base)
Compatible Strollers	Graco Click Connect strollers
Installation Type	LATCH or Vehicle Seat Belt
Base Compatibility	Compatible with all Graco Click Connect Bases
Base	Stay-in-car base