Graco SnugRide 30 User Manual

1 Important
6
Does Your Seat Fit Your Child Correctly?
To make sure your child is secured properly, review section 4 to
understand all of the actions you need to take to properly adjust the
car seat to fit your child.
You Need To Adjust:
Harness Height
Harness straps at or just below the
child’s shoulders. Review section 4-A.
Buckle Position
The correct slot is the one that is closest
to your child without being underneath
them. Review section 4-B.
Harness Tightness
If your fingers slide off the harness straps
without pinching the straps, it is tight
enough. Review section 4-C.
1 Important
7
Did You Do Everything Correctly?
Base or Car Seat Does
Not Move More Than 1”
At The Belt Path
Review section 3.
Car Seat Level to Ground
Review section 3.
Car Seat Is Properly Attached
To Base
Review section 2-C.
Cannot Pinch Harness
Harness straps at or just below
the child’s shoulders.
Review section 4-C.
Chest Clip Even With Armpits
Review section 4-C.

Graco SnugRide 30 Specifications

General

Weight Capacity	4-30 lbs
Height Limit	Up to 30 inches
Harness Type	5-point harness
Infant Head Support	Yes
Side Impact Protection	Yes
Car Seat Base Included	Yes
Adjustable Canopy	Yes
Removable Cover	Yes
Installation	LATCH system or vehicle seat belt
Product Weight	7.5 lbs (without base)
Compatible Strollers	Graco Click Connect strollers
Installation Type	LATCH or Vehicle Seat Belt
Base Compatibility	Compatible with all Graco Click Connect Bases
Base	Stay-in-car base