Graco SnugRide 30 - Buckle Adjustment and Fit; Check and Change Buckle Position; Verify Buckle Security

4 Securing
Child
46
ImportantImportan
t
4 Securing
Child
1. Check the
Buckle Position
The correct slot
is the one that is
closest to your
child without being
underneath them.
47
4-B Adjust Buckle to Fit Child
2. To Change
Buckle Position
Remove child from
the seat. From the
bottom of car seat,
insert the buckle’s
metal clip up through
shell and pad.
From the front, pull
buckle out of the pad
an shell.
3. Insert Metal
Clip Into New
Location
Push metal clip down
through the pad and
shell. Make sure the
buckle’s red button is
facing out.
4. Pull Up On
Buckle To Check
It Is Secured
Make sure buckle’s
metal clip is
completely through
pad and shell.