EasyManua.ls Logo

Graco SnugRide 30 - Harness Adjustment and Fit Checks; Place Child and Position Harness; Check Harness Height and Tightness; Verify Childs Head Position

Graco SnugRide 30
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Securing
Child
42
Important
4 Securing
Child
43
4.
Place Your Child
in the Seat
Make sure their back is
flat against the car seat
back.
Avoid bulky or heavy
clothing when it is
cold out. Doing so will
prevent the harness
straps from tightening
properly. If needed,
place a blanket over
the child after you have
secured them.
5.
Place Harness
Straps Over
Child’s Shoulders
6.
Check Harness
Height
Harness Straps
MUST BE AT OR
JUST BELOW the
Child’s Shoulders
3.
Unbuckle the
Buckle
Place harness straps
off to the sides.
1” (2.5 cm)
7.
Top of Head MUST
BE AT LEAST 1”
(2.5 cm) BELOW
the Top of the Car
Seat

Related product manuals