EasyManuals Logo

Graco SnugRide Click Connect 35 LX User Manual

Graco SnugRide Click Connect 35 LX
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
34
To Adjust Recline on Base:
Turn the knob counter clockwise to the desired
setting to lower the foot .
Turn the knob clockwise to raise the foot .
If there is still red in the level indicator when the
foot is completely extended then raise the foot
and place a rolled towel under the foot until
ONLY blue shows.
When using only the infant restraint without
the base, CHECK infant restraint is level with the
ground. Red level line on the warning label (see step on pg 27) MUST
be level with the ground.
If the infant restraint is resting on the vehicle seat and is still not level
then place a rolled towel under the infant restraint .
Re-adjust the vehicle seat belt as necessary to
secure the infant restraint firmly in the vehicle seat.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco SnugRide Click Connect 35 LX and is the answer not in the manual?

Graco SnugRide Click Connect 35 LX Specifications

General IconGeneral
BrandGraco
ModelSnugRide Click Connect 35 LX
CategoryCar Seat
LanguageEnglish

Related product manuals