Graco True3Fit LX User Manual

Vehicle Information
10
106
Sliding Latch Plate and ALR Retractor
A latchplate that slides freely on the belt
webbing and cannot, by itself, hold the belt
snug around a car seat.
Slowly pull the shoulder belt all the way
out. Route the vehicle seat belt through the
proper belt path and buckle it in. Then, as you
pull the vehicle seat belt tight, feed all the slack
back into the retractor.
Grab the sides of the seat at the belt path and
slide the seat side-to-side and front-to-back.
The seat should not move more than 1” (2.5
cm).
NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 106NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 106 9/18/20 11:51 AM9/18/20 11:51 AM

Graco True3Fit LX Specifications

General

Category	Convertible Car Seat
Brand	Graco
Model	True3Fit LX
Weight Capacity	5 - 65 lbs
Rear-Facing Weight Limit	5-40 lbs
Forward-Facing Weight Limit	22-65 lbs
Height Capacity	Up to 49 inches
Forward-Facing Height Limit	Up to 49 inches
Warranty	1 Year Limited Warranty
Harness Type	5-Point Harness