Name: Graco True3Fit LX
Brand: Graco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Vehicle

Information

105

Locking Latchplate and ELR Retractor

A latchplate that holds the lap belt snug after it

has been adjusted; contains a metal bar on the

underside of the hardware that “locks” the belt

in position.

When installing the car seat, route the

vehicle seat belt through the proper belt path

and buckle it in. Then, pull upwards on the

shoulder belt so that the lap belt gets tight

around the car seat.

Grab the sides of the seat at the belt path and

slide the seat side-to-side and front-to-back.

The seat should not move more than 1” (2.5

cm).

Note: When using the lock-off, you do not

need to switch the retractor. The lock-off locks

the seat belt.

NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 105NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 105 9/18/20 11:51 AM9/18/20 11:51 AM

Questions and Answers:

Need help?

Do you have a question about the Graco True3Fit LX and is the answer not in the manual?

Graco True3Fit LX Specifications

General