Graco True3Fit LX - 3-C Three-Across Checklist

Vehicle Information
10
35
Tips for Each Mode of Use
3-B
35
Three-Across Checklist
3-C
35
• Car seats can touch, but should not overlap.
Make sure the base and seat are touching the
vehicle seat firmly when installed.
• Car seat should not move more than 1” at the
belt path and each seat should be independently
secure.
• If using an infant car seat (A) next to the
True3Fit™ LX, ensure that the infant carrier is
attached into the base at all four attachment
locations each time you install the carrier into
the base. To check this, listen for the ‘click’ and
lift up on the carrier to verify that both sides of
the base are attached and are not caught on the
seat beside it.
A
3-C Three-Across Checklist
NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 35NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 35 9/18/20 11:50 AM9/18/20 11:50 AM