EasyManuals Logo

Graco True3Fit LX User Manual

Graco True3Fit LX
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Rear Facing
4-A
36
4-A Rear-Facing Use
Rear-Facing:
5-40 lb (2.2-18 kg) and whose
head is at least 1” (2.5 cm)
below the headrest adjustment
handle
Infants who weigh less than 22 lb (10 kg) MUST
be rear-facing.
Place car seat rear-facing in the vehicle back seat.
Make sure lower anchor strap or vehicle seat belt
is routed through the rear-facing belt path marked
with a blue label.
Install this car seat tightly in your vehicle. Car
seat should not move at the rear-facing belt path
more than 1” (2.5 cm) from side to side, front to
back.
Check recline level making sure the ball is within
the blue area. Vehicle MUST be on level ground.
Harness straps need to be at or just below
the top of child’s shoulders and chest clip is at
armpit level.
Vehicle Seat Lap/
Shoulder Belt
Vehicle Seat Lap Belt
Visit www.gracobaby.com
and the Graco
®
True3Fit™
LX car seat product page
to view installation videos.
NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 36NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 36 9/18/20 11:50 AM9/18/20 11:50 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Graco True3Fit LX and is the answer not in the manual?

Graco True3Fit LX Specifications

General IconGeneral
CategoryConvertible Car Seat
BrandGraco
ModelTrue3Fit LX
Weight Capacity5 - 65 lbs
Rear-Facing Weight Limit5-40 lbs
Forward-Facing Weight Limit22-65 lbs
Height CapacityUp to 49 inches
Forward-Facing Height LimitUp to 49 inches
Warranty1 Year Limited Warranty
Harness Type5-Point Harness

Related product manuals