26
● Set the switch to “AUTO”.
● As soon as the filter holder
is sufficiently filled, pull it
back. The grinding process
will stop automatically.
● Press the filter holder
against the contact switch
between the filter holder
retainer. The grinding pro-
cess will start automatically.
5 6 7)
CLEANING
Old coffee remaining in the unit may lead to oxidation. This affects the result of the preparation;
unpleasant and unpalatable taste may develop. The unit should always be in a well-kept con-
dition in order to ensure perfect Espresso at all times.
Depending on use, clean the unit at least once a week.
Before cleaning, remove the power plug.
● Use a soft and moist cloth to clean the outer surfaces of the unit. Use a mild detergent in
case of heavy soiling.
● Remove the coffee bean container; hold the grinding ring; press the bean container down
and turn counter-clockwise. Make sure that run-through of the coffee beans is closed on
the coffee bean contain.
● Place the unused beans in an airtight container so keep the flavour.
● Clean the coffee bean container and the coffee grounds container in warm water using a
little washing-up liquid.
● Afterwards, dry the containers well.
CLEANING THE GRINDING MECHANISM
● Remove the power plug.
● Remove the coffee bean container as described in the chapter titled “Cleaning”.
To Next Page
Loading...
