Why are the operating noises of my Graef Kitchen Appliances increasing with use?
If the operating noises of your Graef Kitchen Appliances increase with use, the gear likely isn't greased sufficiently. To address this, undo and clean the blade. Then, use petroleum jelly to grease the inside of the blade (cogwheel of blade) and the black ring.
What to do if my Graef Kitchen Appliances unit is switched off automatically?
If your Graef Kitchen Appliance unit switches off automatically, it could be due to short-time operation, which causes an automatic shutdown after about 5 minutes. It might also be due to overload protection, meaning the blade has been blocked. To resolve this: * Switch the unit on again. * Carefully remove the cause of blockage, keeping your fingers away from the hazard area, and then restart the unit.
Why doesn't the blade of my Graef Kitchen Appliances cut well anymore?
If the blade of your Graef Kitchen Appliances unit no longer cuts well, the blade is blunt and needs sharpening. Send the blade in for sharpening. Please get in touch with our after-sales service. +49 (2932) 9703677.
How to fix a sluggish blade on my Graef Kitchen Appliances?
If the blade of your Graef Kitchen Appliances moves sluggishly, it's likely that the cogwheels of the blade are either not greased or are dirty. To fix this, undo and clean the blade. Then, use petroleum jelly to grease the inside of the blade (cogwheel of blade) and the black ring.
What to do if the blade of my Graef Kitchen Appliances makes a grinding noise?
If the blade of your Graef Kitchen Appliances is causing a grinding noise, this is potentially due to food residues on the blade. To resolve this, remove, clean, and grease the blade.
How to fix a sluggish slide on Graef Kitchen Appliances?
If the slide on your Graef Kitchen Appliances moves sluggishly, it is because the slide is dirty. You should clean and grease the slide.
What to do if the slide on my Graef Kitchen Appliances cannot be moved?
If the slide of your Graef Kitchen Appliances cannot be moved, it is probably locked by the child safety lock. To unlock it, undo the slide lock.
Lists and identifies the components of the EVO E 10 / E 11 food slicer models.
Details the technical specifications for the EVO E 10 / E 11 food slicer.
Lists and identifies the components of the EVO E 20 / E 21 / EVO E 80 / E 81 models.
Details the technical specifications for the EVO E 20 / E 21 / EVO E 80 / E 81 food slicer.
Highlights specific dangers associated with the food slicer's sharp blade.
Explains the mechanism to secure the blade and prevent accidental use.
Describes the unit's built-in 5-minute automatic shutdown feature.
Details how the machine protects itself from motor overload.
Lists suitable food items and materials that can be cut with the slicer.
Guides on using the switches for temporary, non-continuous slicing.
Explains how to operate the switches for continuous slicing mode.
Addresses issues with the carriage movement and potential causes.
Provides solutions for when the carriage is stuck or immobile.
Explains reasons for automatic shutdown and how to restart.
Addresses issues with the blade's movement and potential causes.
Details causes and solutions for grinding noises originating from the blade.
Explains why operating noises may escalate with extended use.
Provides solutions for when the blade's cutting performance deteriorates.
General| Brand | Graef |
|---|---|
| Model | EVO |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
