EN
Troubleshooting
Problem Cause Solution
Slide moves sluggishly. Slide slide is dirty. Clean and grease the slide
slide.
Slide cannot be moved. Lock slide (child safety lock). Undo the slide lock.
Unit is switched off automati-
cally.
• Short-time operation: Automatic
shutdown after about 5 minutes.
• Overload protection: Blade has
been blocked.
• Switch the unit on
again.
• Carefully remove the
cause of blockage; in
the process keep your
ngers away from the
hazard area, and restart
the unit.
To Next Page
Loading...
