EasyManua.ls Logo

Graef HE80 - Unpacking; Requirements for Installation Location

Graef HE80
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
EN
by the manufacturer, its service or similarly quali-
ed persons in order to avoid a hazard.
• Always pull the supply cord from the electric
socket using the connector plug, not the supply
cord.
• Do not carry the unit by the supply cord.
• Never transport the unit during operation.
• Do not touch the plug with moist hands.
• Do not use the packing material as a toy. Danger
of suffocation.
• Follow the instructions regarding the require-
ments for the place of installation and on the
unit’s electrical connection to prevent personal
harm and property damage.
• Switch off the appliance and disconnect from
supply before changing accessories or approach-
ing parts that move in use.
• Let the unit cool off before cleaning.
• Do not use any aggressive or abrasive cleaning
agents and do not use any solvents.
• Do not scratch off stubborn soiling with hard ob-
jects.
• Make sure that no liquid gets into the interior of
the unit.
• Do not put the unit in the dishwasher and do
not hold it under owing water.
Unpacking
To unpack the unit, proceed as below:
• Take the unit out of the carton.
• Remove all pieces of the packing.
• Remove any possibly extant labels on the unit
(do not remove the rating plate).
Requirements for the installation location
For safe and awless operation of the unit, the
place of location must meet these prerequisites:
• The unit must be set up on a rm, at, level,
non-slip and heat resistant base that has suf-
cient load bearing capacity.
• Select the place of location so that children can-
not reach the hot surfaces of the unit.
• The unit is not intended for installation in a wall
or a built-in cupboard.
• Do not set up the unit in a hot, wet or moist