EN
■
Do not set up the unit in a hot,
wet or moist environment.
■ The electric socket must be read-
ily accessible so that the power
cord can be easily unplugged.
Electric connection
Follow these instructions about the
electrical connection for safe and
awless operation of the unit:
■ Before connecting the unit, com-
pare the connection information
(voltage and frequency) on the
rating plate with those of your
electrical network. This informa-
tion must match to avoid dam-
age to the unit. If in doubt, ask
your electrician.
■ The socket must be fused with at
least a 10A circuit breaker.
■ Make sure that the power cord is
not damaged. Do not conduct it
over hot surfaces or sharp edges.
■ The connector cable must not be
pulled tight.
■ The electrical safety of the unit
is only ensured if it is connected
to a properly installed protec-
tive conductor system. Operation
on a socket without a protec-
tive conductor is prohibited. If in
doubt, have the building instal-
lation checked by an electrician.
The manufacturer does not assume
any responsibility for damages
caused by a missing or interrupted
protective conductor.
Milk frother MS 61 / MS 62 / MS 80 / MS 85
20
To Next Page
Loading...
