Graef MS 703 - Making Milk Froth; Milk Frothing Process

16
MAKING MILK FROTH
• Connect the unit to the
power grid.
• Remove the cap.
• Insert the blunger with
spiral. (magnet down)
• Put the stainless steel
tank on the base station
and pour the milk into
the stainless steel tank.
Notice: Only pour the milk into the stainless steel tank, not into the base
station.
MAX mark is only for plunger without spiral.
• If the lling level of plunger with spiral is too high it will overow the tank.
• Put the cap on the stain-
less steel tank.
• Press the upper button
to froth milk. The but-
ton illuminates red.