SOCKET GUIDE (NORTH AMERICA 220 V ONLY)
THANK YOU FOR CHOOSING THE GRAINFATHER S40 BREWING SYSTEM
The S40 has been developed for small batch brewing. Get started by following these quick and easy
instructions on how to assemble and use your S40 Brewing System. We recommend reading the following
safety information before use. Please also find enclosed, advice for cleaning and storing your S40.
NEMA 14-30R
NEMA L14-30R
NEMA 14-50R NEMA 14-60R
4-pin modern
laundry dryer
supply, commonly
installed after 1996.
Brewing system is compatible by
using an adapter that includes a
ground connection and has
appropriate electrical certification.
4-pin electric
oven supply.
Brewing system is compatible by
using an adapter that includes a
ground connection and has
appropriate electrical certification.
NEMA 6-15R NEMA 6-20R
3-pin workshop and
power tools supply.
3-pin workshop
and power tools
supply.
3-pin laundry
dryer supply, most
common installation
prior to 1996.
This power supply socket is
NOT SUITABLE for use with the
brewing system. This socket provides
hot-hot-neutral connections. The
brewing system requires a ground
connection to perform safely in the
event of an electrical fault.
Brewing system is compatible by
using an adapter that includes a
ground connection and has
appropriate electrical certification.
Brewing system is compatible using
power cord supplied in-box.
POWER SUPPLY SOCKET DESCRIPTIONCOMPATIBILITY
NEMA L6-20R
NEMA 10-30R
NOT SUITABLE
WARNING! (NORTH AMERICA 220 V ONLY)
Please check your unit rating label for the voltage. If your unit is a North American 220 V product, the Power Cord,
Control Box and Boiler Body included in the box are designed to be used together with a 220 V supply. Using any of
these components with another product (including the 110 V S40) may result in hazards and equipment damage.
2
To Next Page
Loading...
