1. Press the key to access to configuration.
2. Use the key to select the desired mode.
3. Press the key to confirm.
UF-9 Gravity Value setup
Although the balance allows the Standard Calibration, the G value setup provides a
greater accuracy. This pre-calibration is performed with the switch CAL in ADJ
position. The value will be set to -00- and it will be replaced each time you enter a new
value.
Gravity value of Distributor: configurated before the weight calibration.
Gravity value of User: configurated after the weight calibration.
The value of gravity will be denied if is greater than 9.83217 (Polar Gravity) or less
than 9.78031 (Ecuador Gravity)
Default value: 9.79423
1. Press the key to access to configuration.
2. The display will show the last value for 1 second.
3. Use the keys and to move from a digit to other and the key to increase
the digit value.
4. Press the key to confirm
GUARANTEE
This scale is guaranteed for one year from the delivery date. The guarantee covers any
fabrication defect of the material.
During this period GRAM PRECISION, covers the manpower and the spare parts necessary for
the reparation of the scale.
This guarantee does not cover the failures caused by an inappropriate use or overcharge.
The guarantee does not cover the freight cost (transport) necessary to repair the scale.
To Next Page
Loading...