14
GB
Setting up and installation
Where to place the refrigera-
tor/freezer
For safety reasons the refrigerator/
freezer must not be installed outdoors;
it must be placed in a dry room. Never
place the appliance close to sources
of heat such as cookers or radiators,
and avoid placing it in direct sunlight.
The surface on which the appliance
is placed must be plane. Do not use
a frame or similar. The small wheels
mounted at the rear of the refrigera-
tor/freezer make it easy to place it in the
required position.
The refrigerator/freezer can stand freely
on the floor or be built into a kitchen ele-
ment or a refrigerator element.
It is important that the refrigerator/
freezer stands completely level and that
there is good air circulation over, under
and around it. The appliance can be
adjusted by turning the four adjusting
screws on the plinth. After adjustment,
the feet and the two rear wheels must
be in contact with the surface on which
the appliance stands.
The illustrations show how to create
sufficient air circulation around the cabi
-
net. The dimensions give the actual size
of openings. The circulation area must
be at least 200 cm
2
.
To Next Page
Loading...
Need help?
General
