76-504-0862 16/GB
Service
The refrigerating system and the hermetically sealed compressor require no
maintainance - they merely have to be kept clean. The cover over the panel screen
can be removed by pushing it upwards.
If refrigeration fails, first look to see whether the cabinet has been unintentionally
switched off, or whether a fuse has blown. If the cause of failure cannot be found,
contact your supplier quoting TYPE, PART NO and SER. NO of the cabinet. This
information can be found on the nameplate which is situated on the inside top right
hand corner.
Disposal
If the cabinet for which there is no longer any use is to be disposed of, please do so
in an environmentally correct way. There might be special requirements/conditions to
be observed.
Nameplate
To Next Page
Loading...
