Safety instructions
22
GB
•
••
• Before driving, you must check if all seat settings selected guarantee a safe operation of
the vehicle.
Connecting data
•
••
• If you need to connect cables to the vehicle supply network, strictly observe the following
instructions:
Before you connect an electrical consumer fitted in the driver’s seat (e. g. the seat
heater or the seat ventilation), you must obtain the relevant electrical data for the respective
vehicle with reference to voltage, protection and the kind of connections from the
manufacturer, from GRAMMER AG or the company’s agencies.
For safety reasons, the installation and connection to the vehicle supply network must be
carried out by authorized specialist personnel only.
The seat connections must be protected independently of other vehicle components.
Seat heater
24V DC 10A
• For pneumatic connection, the following data have to be observed:
Working pressure Air connection
Max. 10 bar / min. 6,5 bar Air input = black / air output = grey
• For building an electric connection, select an electric circuit by means of which the electric
consumers of the driver’s seat are separated from the live network when the ignition is
switched off.
Guarantee and liability
•
••
• GRAMMER AG does not disclaim any guarantee or liability for damage resulting from
incorrect assembly, use or repair of the seats.
•
••
• Further details on the guarantee granted by GRAMMER AG are stated in your contractual
documents (see invoice or delivery note). Guarantee claims against GRAMMER AG
beyond the guarantee obligations described there are excluded.
Subject to design, technical and equipment modifications as well as homologation regulations.
To Next Page
Loading...
