Seat functions and operation
GB
25
Swivel*
The swivel is released by pulling the locking
lever (see arrow). The seat can then be swiv-
elled 20° to the left or to the right. It can be
locked into every 10° position.
The locking lever must latch audibly
into place. The swivel should be in the central
position for driving.
Absorber*
The absorber setting of the seat can be varied
to suit the on and off-road driving conditions.
The cushioning effect can be individually ad-
justed for this purpose.
Turn the lever to the desired position and re-
lease
1 soft
2 hard
Maintenance
Dirt can impair the function of the seat, so
make sure you keep your seat clean!
Upholstery can be quickly and simply re-
moved from the seat frame for easy cleaning,
or replacement.
Caution: take care with the backrest
frame - it may jerk forward and cause
injury!
During cleaning the upholstery should not be
soaked through.
Use a standard commercially available up-
holstery or plastics cleaning agent. Test
first for compatibility on a small, concealed
area.
* if fitted
To Previous Page
Loading...
