Grandhall CSTS13ALP User Manual (English)

Questions and Answers:

S
Sandra SanchezAug 2, 2025
Why is my Grandhall CSTS13ALP not lighting?
- B
  benjaminharrisAug 2, 2025
  If your Grandhall Grill fails to light, several factors could be the cause. First, turn the gas off at the source and set the control knobs to OFF. Wait 5 minutes for the gas to clear, and then try again. Make sure to check the gas supply and connections to ensure they are properly connected. If there's an obstruction in the gas line, disconnect the fuel line from the grill (do not smoke!), briefly open the gas supply to clear any blockages, then close the gas supply and reconnect the fuel line. Also, examine the burner tubes to ensure they are correctly positioned over the orifices. Inspect the ignitor for proper alignment and check for a spark at the electrode tip. Finally, check for disconnected electric wires at the ignitor junction box and ensure the AA battery is not weak.
J
johnstonrebeccaAug 10, 2025
How to fix a Grandhall CSTS13ALP Grill that won't ignite?
- B
  benjaminholmesAug 10, 2025
  To fix a Grandhall Grill that won't ignite, start by turning off the gas supply at the source and setting the control knobs to OFF. Wait 5 minutes before attempting to relight the grill. Check the gas supply and connections to ensure they are properly connected. If the burner tubes are misaligned over the orifices, reposition them. If you think there is an obstruction in the gas line, remove the fuel line from the grill, open the gas supply briefly to clear any obstruction, then close it off and reconnect the fuel line. Inspect the ignitor for proper alignment and check for a spark at the electrode tip. Also, examine the ignitor junction box for disconnected electric wires and replace the AA battery if it's weak.
R
ryanrobertAug 15, 2025
How to replace ignitor battery in Grandhall CSTS13ALP?
- R
  Rebecca MaloneAug 15, 2025
  To replace the ignitor battery in your Grandhall Grill, remove the ignitor cap and replace the battery.
A
Angie HamiltonAug 18, 2025
How to clear plugged orifice on Grandhall Grill?
- R
  Robert HudsonAug 19, 2025
  To clear a plugged orifice on your Grandhall Grill, remove the burners by unscrewing them from the rear using a Phillips head screwdriver. Carefully lift each burner away from the gas valve orifice. Remove the orifice from the gas valve and gently clear any obstruction with a fine wire. Reinstall all orifices, burners, screws, and cooking components.