Grandstream Networks DP715 Configuration Manual

Once the changes have been made click save then at the top of the page select Apply and wait 30
seconds then you're done.
Step 5
Properly rebooting your device
After filling in the fields as directed click the Update button at the bottom of the page.
You will again be taken to a screen indicating that the device is rebooting.
After 30 seconds, click BASIC SETTINGS link listed at the top of the page.
On the Basic Settings page click the Reboot button to reboot your DP715. Please wait at least 90
seconds for the unit to finish rebooting. Once the unit has finished rebooting you should no longer
see the light on top of the DP715 blinking red. If the light is no longer blinking red then your unit
is configured and ready to make calls.

Grandstream Networks DP715 Specifications

General

Brand	Grandstream Networks
Model	DP715
Category	IP Phone
Language	English