Setting up the Charge Station
Please refer to the following steps for setting up the charge station and charging the Handsets:
1. Connect the DC plug on the power adapter to the micro-USB or Type-C connector on the charge station.
2. Connect the other end of the power adapter to an electrical power outlet.
3. After setting up the Handsets and the charge station, place the Handsets in the charge station.
Setting up Charging Stations
DP Base Station LED Patterns
DP755/DP752
The DP755/DP752 has 3 LED lights on it. Please refer to the following table for the meaning of each light.
DP755 LED Patterns
LED Light Status
Indicates Power ON/OFF.
Indicates the status of SIP account registration and network.
● Solid ON: SIP account registered.
● Blinking: SIP account not registered or network errorList Item 2