Call Transfer
The DP Handsets support the Call Transfer feature, you can transfer a call to another party using one of the following ways:
Blind transfer: Transfer a call directly to another party without consulting
Attended transfer: Transfer a call with prior consulting.
Blind Transfer
1. Press the “Options” softkey during a call, and then select Blind Transfer, or press the softkey Transfer for DP Handset.
2. The initial call will be on hold, enter the number you want to transfer the call to.
3. Press the Dial key . The call is connected to the number or the handsets you specified, and the LCD screen prompts
Call Transferred.
Attended Transfer
1. Press the Left softkey “Options” during a call, and then select Attended Transfer.
2. Enter the number you want to transfer the call to, then press the Dial key or press the Call Softkey.
3. Once the second call is established, press left softkey Transfer to finish the Attended transfer.
Transfer between handsets
The Call Transfers can also be done between handsets without a SIP account. The DP75x can transfer a call to another handset
even if it has no SIP account registered.
Speed Dial
Speed dial allows users to perform single-digit dialing to predefined numbers. This feature is particularly useful to speed up
dialing frequently used or hard-to-remember numbers. A maximum of 8 speed dial numbers is allowed.
For example, the digit key 2 is configured as a speed dial key and assigned the number 2000, the phone will dial out the
number 2000 directly when you long press digit key 2.
To assign the frequently used numbers as speed dial keys:
1. Press Menu to bring up the operation menu.
2.
Access to Shortcut and then use the Arrow keys to reach the Speed Dial sub-menu.
Or;
Long press the representative number from 2 to 9 to set. (Note: The Speed dial number should not be already set on the
chosen representative number, otherwise long press will initiate a call to the configured speed dial number).
1. Choose the digit key (2-9) to set and press Options or OK button. Three options will be available:
Edit: To configure manually a contact as speed dial. Users need to enter “First Name”, “Last Name” and “Number”. (Note:
First Name + Number or Last Name + Number are accepted).
From Contacts: To set a contact from the phonebook directory to be a speed dial.
To Modify a Speed Dial:
Repeat the above 2 steps.
To Next Page
Loading...
