In step 2, re-edit /re-assign a contact from the shared or private directory as a speed dial on the selected key.
To Delete a Speed Dial:
Repeat the above 2 steps.
At step 2, select the Clear Entry option and press OK or Select to confirm.
3-Way Conference
The DP Handstes supports creating a local conference with other parties (including handsets starting the conference).
To start a 3-Way conference, follow the below steps:
1.
Press the Dial key to place a call to the first party.
2. Press the left softkey “Options”, then select Conference.
3.
Enter the second party number you want to add to the conference and press the Dial Key .
To drop the conference call, press or “End” softkey.
Voice Mail
The voice mail feature ensures that you will never miss any important messages. It permits either to leave voice mails to
someone else or receive and listen to voice mails via the handsets
Set Voice Mail Feature Code
There are 2 ways to set the Voice Mail Feature Code, either using the DP Handsets Menu or using the DP75x Base Station Web
Interface.
Note: The Voice Mail Feature Code depends on the service provider or IP-PBX used. For example, if UCM6xxx is the SIP server,
the Voice Mail Feature Code is *97.
Using DP Handsets Menu
1. Press Menu (left softkey or the selection key) to bring up the operation menu.
2.
Access to Voice Mail and then select Set Voice Mail sub-menu.
3. Select the account and enter the “VM Access Number”, then press the “Save” softkey.
Using DP75x Base Station Web Interface
1. Access DP75x Base Station Web Interface.
2. Go to Accounts🡪 General settings.
3. Configure Voice Mail Access Number.
Play Voice Mail Messages
1. Press “Menu” to bring up the operation menu.
2.
Access to Voice Mail and then select the Play Message sub-menu.
3. Select the account to retrieve your voice messages saved on your voicemail.
Note
Conference can be bridged before third-party answers.
To Next Page
Loading...
