Grandstream Networks GXP1405 User Manual

Grandstream Networks, Inc. GXP1400/1405 User Manual Page 23 of 36
Firmware version: 1.0.1.83 Last Updated: 08/2011
XML Config File
Password
The password used for encrypting the XML configuration file using OpenSSL. This
is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User Name
The user name for the HTTP/HTTPS server.
HTTP/HTTPS Password
The password for the HTTP/HTTPS server. It won’t display for security protection.
Upgrade Via
This field allows the user to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Firmware Server Path
Defines the server path for the firmware server. It can be different from the
Configuration server which is used for provisioning.
Config Server Path
Defines the config server path for provisioning; it can be different from the Firmware
server.
Firmware File
Prefix/Postfix
Default is blank. If configured, GXP1400/1405 will request the firmware file with the
prefix/postfix and only the firmware with the ma
tching encrypted prefix will be
downloaded and flashed into the phone.
This setting is useful for ITSPs. End user should keep it blank.
Config File
Prefix/Postfix
Default is blank. If configured, GXP1400/1405 will request the config file with the
prefix/postfix and only the file with the matching encrypted prefix will be downloaded
and flashed into the phone.
This setting is useful for ITSPs. End user should keep it blank.
Allow DHCP Option 43
and Option 66 to
override server
Default is “Yes”. This allows device to get provisioned from the server automatically.
Automatic Upgrade
This function is used by ITSP. End user should NOT touch these parameters.
Default is “No”. Choose “Yes” to enable automatic HTTP upgrade and provisioning.
In “Check for upgrade every” field, enter the number of minutes to check the HTTP
server for firmware upgrade or configuration changes. When set to “No”, the phone
will only perform HTTP upgrade and configuration check once at boot up.
Authenticate Conf File
Default is “No”. If set to “Yes”, configuration file would be authenticated before
acceptance. End user should use default setting.
Enable TR-069
Default is “No”.
ACS URL
URL for TR-069 Auto Configuration Servers (ACS).
TR-069 Username
Enter username for TR-069.
TR-069 Password
Enter password for TR-069.
Periodic Inform Enable
Enable periodic inform. Default is “No”.
Periodic Inform Interval
When enabling periodic inform, set up the periodic inform interval.
Connection Request
Username
Enter the connection request username.

Grandstream Networks GXP1405 Specifications

General

Brand	Grandstream Networks
Model	GXP1405
Category	IP Phone
Language	English