Grandstream Networks GXP2130 Quick Installation Guide

3 4
CONNECTING THE PHONE
PHONE SETUP:
PC Port LAN Port Power Headset Port Handset Port
Installing the Phone (Phone Stand ):
For installing the phone on the table with the phone st and, attach the phone stand
to the bottom o the phone where there is a slot or th e phone stand (upper part,
bottom part) .
Installing the Phone (Wall Moun t):
1. Attach the wall mount to the slot on the back o the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab rom the handset cradle (See gure below).
4. Rotate the ta b and plug it back into the slot with the ex tension up to hold the
handset while the phone is mounted on the wall (See gure below).
Tab with extension up
Handset rest
Tab with extension down
DC12PC LAN HEADSET HANDSET
Slots for the wa ll
mount and phone
stand
DC12PC LAN HEADSET HANDSET
Installing BLF Paper Label:
1. Install the paper label under the plastic notches on the phone and gently lay the
paper down on the phone surace.
2. Install the plastic cover over the paper label by inserting the cover unde r the
plastic notches on the phone.
Label
Cover

Grandstream Networks GXP2130 Specifications

General

Brand	Grandstream Networks
Model	GXP2130
Category	IP Phone
Language	English