Grandstream Networks GXP2130v2 - Figure 2: Scan Bluetooth Device; Figure 3: Pairing to Bluetooth Device

P a g e | 7
Bluetooth User Guide
Figure 2: Scan Bluetooth Device
Note: If the wanted device does not show up in the list, make sure the device is turned on and set to
be discoverable. User can also press “Clear” and “Rescan” softkeys to restart the scanning;
4. The discovered devices will show up in the scan result list with devices names. If it is not paired, it will
show the status "Unpaired" next to the device name. Select the wanted device, and press “Pair”
softkey to pair it with the GXP Phone. Then a window will prompt up where the user can find a random
PIN Code needed in the wanted device to pair it with the GXP Phone.
Figure 3: Pairing to Bluetooth Device
Note: Usually, the default Bluetooth headset Pin code is 0000.