# or SEND and a direct IP call to aaa.bbb.ccc.XXX will be completed. “aaa.bbb.ccc” is from the local IP
address regardless of subnet mask. The number #xx or #x are also valid. The leading 0 is not required
(but it’s OK).
For example:
192.168.0.2 calling 192.168.0.3 — dial #3 followed by # or “SEND”;
192.168.0.2 calling 192.168.0.23 — dial #23 followed by # “SEND”;
192.168.0.2 calling 192.168.0.123 — dial #123 followed by # “SEND”;
192.168.0.2: dial #3 and #03 and #003 results in the same call — call 192.168.0.3.
Note:
The # will represent colon “:” in direct IP call rather than SEND key as in normal phone call;
If you have a SIP server, configured, direct IP call still works. If you are using STUN, direct IP call
will also use STUN;
Configure the “User Random Port” to “No” when completing direct IP calls.
Virtual Multi-Purpose Keys
Web UI Configuration
Users can find new Virtual Multi-Purpose Keys (VPK) configuration under phone’s web UI?Settings?
Programmable Keys?Virtual Multi-Purpose Keys tab. It is recommended to select “Reset” on this
page before configuring VPK here. By default, all fixed VPKs are listed.
GRANDSTREAM NETWORKS
No image found
Page 41
To Next Page
Loading...
