Test Report #: SHE-1402-11114-RF-#1
Prepared for Grandstream Networks, INC
Prepared by ECMG Electronic Technical Testing Corp (Shenzhen). Page 7 of 36
Marking Requirement of EUT
Requirement :
The marking shall include as a minimum:
• the name of the manufacturer or his trademark;
• the type designation;
• Equipment category(Only for receiver).
The equipment shall be marked in a visible place. This marking shall
be legible and durable. In cases where the equipment is too small to
carry the marking, it is sufficient to provide the relevant information in
the users' manual.
Note :For detailed please refer to EUT label of attached.
Equipment Modification
Any modifications installed previous to testing by Grandstream
Networks, INC. will be incorporated in each production model sold or
leased in Europe.
There were no modifications installed by ECMG Electronic Technical
Testing Corp (Shenzhen).