Grandstream Networks GXV3450 Manual

Registration
Retry Wait
Time (s)
Configures the time period (in seconds) in which the phone will retry the registration process in the event
that is failed. The default setting is 20.
The maximum value is 3600 (1 hour).
Add Auth
Header On
RE- register
Configure if the SIP account needs to add Auth header in RE-REGISTER.
If the option is checked, device will always add authentication header in REGISTER.
If the option is unchecked, device will only send authentication for the first REGISTER.
Enable SIP
OPTIONS
Keep Alive
Enables SIP OPTIONS to track account registration status so the phone will send periodic OPTIONS message
to server to track the connection status with the server.
The default setting is “No”.
SIP
OPTIONS
Keep Alive
Interval (s)
Configures the time interval when the phone sends OPTIONS message to SIP server. The default setting is
30 seconds, which means the phone will send an OPTIONS message to the server every 30 seconds.
The default range is 1-64800.
SIP
OPTIONS
Keep Alive
Maximum
Tries
Configures the maximum times of sending OPTIONS message consistently from the phone to server. Phone
will keep sending OPTIONS messages until it receives response from SIP server. The default setting is “3”,
which means when the phone sends OPTIONS message for 3 times, and SIP server does not respond this
message, the phone will send RE-REGISTER message to register again.
The valid range is 3-10.
Subscribe
for MWI
Configures the phone system to subscribe voice message service. If it is set to “Yes”, the phone system will
periodically send SIP SUBSCRIBE message for Message Waiting Indication service. GXV3480 phone system
supports both synchronized and non-synchronized MWI.
The default setting is “No”.
Use Privacy
Header
Determines if the Privacy header will be presented in the SIP INVITE message and if it includes the caller info
in this header. If it is set to “Default”, the Privacy Header will be omitted in INVITE when “Huawei IMS”
special feature is active. If set to “Yes”, it will always be presented. If set to “No”, it will always be omitted.
The default setting is “Default”.
Use P-
Preferred-
Identity
Header
Specifies if the P-Preferred-Identity Header will be presented in the SIP INVITE message. If set to “default”,
the P-Preferred-Identity Header will be omitted in SIP INVITE message when “Huawei IMS” special feature is
active. If set to “Yes”, the P-Preferred-Identity Header will always be presented. If set to “No”, it will be
omitted.
The default setting is “Default”.
Use P-
Access-
Network-
Info Header
Enables/disables the use of P-Access-Network-Info header in SIP request. When disabled, the SIP message
sent from the phone will not include the selected header.
Default setting is “No”.
Use P-
Emergency-
Info Header
Enables/disables the use of P-Emergency-Info header in SIP request. When disabled, the SIP message sent
from the phone will not include the selected header.
Default setting is “No”.
Use Mac
Header
Add MAC in
User-Agent
If Yes, the SIP message for register or unregister will contains MAC address in the header, and all the
outgoing SIP message including REGISTER will attach the MAC address to the User-Agent header;
If No, neither will the MAC header be included in the register or unregister message nor the MAC
address be attached to the User-Agent header for any outgoing SIP message.
Configures whether to add MAC address in User-agent header. If set to “No”, all outgoing SIP messages will
not attach MAC address to the User-agent header. If set to “Yes except REGISTER”, all outgoing SIP
messages except REGISTER message will attach the MAC address to the User-agent header. If set to “Yes to
All SIP”, all outgoing SIP messages including REGISTER message will attach MAC address to the User-agent
header.
SIP
Transport
Determines which network protocol will be used to transport the SIP message. It can be selected from
TCP/UDP/TLS.
Default setting is “UDP”.
Local SIP
Port
Determines the local SIP port used to listen and transmit. The default setting is 5060 for Account 1, 5062 for
Account 2, 5064 for Account 3, 5066 for Account 4, 5068 for Account 5, and 5070 for Account 6.
The valid range is from 5 to 65535.

Grandstream Networks GXV3450 Specifications

General

Brand	Grandstream Networks
Model	GXV3450
Category	Conference System
Language	English