FIRMWARE VERSION 1.0.6.8 GXW40XX USER MANUAL Page 57 of 59
Similarly, Config File Prefix and Postfix allows device to download the configuration file with the matching
Prefix and Postfix. Thus multiple configuration files for the same device can be stored in one directory.
In addition, when the field “Check New Firmware only when F/W pre/suffix changes” is selected, the
device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.
MANAGING FIRMWARE AND CONFIGURATION FILE DOWNLOAD
When “Automatic Upgrade” is set to “Yes”, Service Provider can use P193 to have the devices
periodically check with either Firmware Server or Config Server, whenever they are defined. This allows
the device periodically check whether there is any new changes need to be taken, similar to the AntiVirus
Software to upgrade the Virus Definition files. Screenshot is below:
Automatic Upgrade:
No Check every day Check every week
Hour of the day(0-23):
Day of the week(0-6):
If automatic upgrade is enabled, service provider can further customize the behavior and distribute server
load by setting hour of the day and/or day of the week for upgrade.
To Next Page
Loading...
